How To Prep Wood For Stain After Sanding
The most important part of finishing a piece of furniture happens before you open a can of stain or paint it starts with the sanding.
How to prep wood for stain after sanding. Also dont apply the stain until the wood. Use a palm sander or a random orbital sander to quickly strip away imperfections and previous layers of stain to reveal the underlying natural wood. Let the cleaner sit for 10 to 15-min.
Wipe the folded tack cloth across the wood to remove dust. What it does is open the pores of the wood to allow it to take the stain evenly and deeply. The technique of wetting the wood down before staining is called popping the grain.
Sand parallel with the grain only. Moisten a lint-free cloth and wipe down the wood. If you choose this method make sure you only use a wet rag to apply the water.
Dry rags or brushes arent the most effective tools for removing dust. Instead use a tack cloth a sticky piece of cheesecloth made especially for this purpose. Remove them by sanding the wood with 120-grit sandpaper.
When its smooth its ready for stain and there are two types commonly used oil-based and water-based. It takes four steps to sand wood to perfection. Allow the dampened wood to dry 30 minutes before the final sanding.
What different is that you will need to go to extra length to prepare the project for staining. Optional pre-wetting of the wood when using waterbased finishes. Then rinse the entire deck and let it dry.
