How To Prepare Woodwork For Painting

How to repaint and revive outdoor woodwork real homes painting how to prepare a house for exterior norton abrasives how to prepare exterior surfaces for painting dummies how to paint a front door lowe s national painting week sherwin williams.

How to prepare woodwork for painting. You probably know that bare raw w. Use a long-handled extension pole or a step ladder to sand hard to reach places at the top of your wall or on the ceiling. If the kit comes back positive consult a painting.

Now that your woodwork project is constructed its time to get ready for painting. For previously painted walls take a look for any lumps and bumps or flaking paint areas. If the wood has been previously painted use fine sandpaper to lightly sand it down and remove imperfections.

If you plan on painting baseboards trim or doors make sure to sand them as well. Clean thoroughly with sugar soap sand down with a fine paper to give a key for the new paint and then apply your paint. For previously painted surfaces there is no need to remove all the paint if its is not flaking and is in a stable condition.

Do this in the direction of the grain until you have a smooth and level surface. It helps prevent any dust particles from sticking to the walls and being painted over. This will ensure all dust and any particles left behind from moving the furniture away from the walls will be collected.

Paintwork with only a few light blemishes can be prepared by sanding. If you have a home built or painted before 1978 use a lead paint test kit before you begin sanding. Using opaque acrylics like I have been with a gesso-only technique has been fine.

In this tutorial our Wickes experts show you how to prepare interior woodwork for paintingSubscribe to the Wickes YouTube channel here. You can scrape these back to a solid edge then apply some wall filler. Use a sanding block or sandpaper wrapped around a block of wood to sand down the filled area.