How To Use A Wood Turning Lathe

Hand turning lathes are often used in schools and colleges see Figure 1.

How to use a wood turning lathe. The initial turning on the lathe will be safer smoother and easier on you and your lathe. A lathe of some sort some tools to shape the wood and a way to sharpen those tools. Use the left hand to guide the tool by holding your hand over the tool near the blade edge.

The size of the jaws completely dictates the size of the tenon used on the wood bowl. This is how you can make a small project from a wood-piece using a wood lathe. Woodturning is the process of carving a block of wood into a symmetrical object such as a wood spindle or bowl while using a motor-driven lathe to spin the wood at high speed while cutting tools including a variety of chisels and knives gradually carve the piece into the desired shape.

Rest your little finger and the back of your palm on the tool rest located in the center of your wood lathe machine. Always Cut With the Grain When woodturning one should always work with the grain. Pakistani Skillful Man Use A Custom Lathe Machine For Wood Turning Project.

You really only need three things to get into woodturning. Turn the lathe on making sure it is at the lowest speed setting. In order to use a wood lathe lock a piece of wood into the head stock and tail stock start the tool at its slowest speed and support the tool with the blad.

The cutting edge above the cylinder. Further we explained different terms related to the wood lathe machines. You want to move in toward it perpendicular to the work piece until the cutting edge just touches the wood.

But the block will not be totally round or balanced. Following are some guidelines to follow when starting any out of round stock. Place the cutting edge of the tool on the rest keeping clear of the rotating work piece check your grip and slowly begin easing it toward the work piece.