How To Prepare Wood Paneling For Painting
If grease or other problem stains are present remove them using a mild cleaning solution then wipe with a clean damp rag.
How to prepare wood paneling for painting. Instructions to Prepare Wood Panels 1 Clean off any dust or debris from all exposed areas of the panel including the cradled sides and panel back first using a vacuum or air pressure if very dusty then wiping clean with a microfiber cloth or other lint free cloth slightly dampened with water. For full details on painting wood wall paneling continue reading below. Sweep an orbit sander over the wood in wide circular strokes.
Some of the cheaper wood paneling is not really the wood panel. Explaining drying times and how many coats she prefers. Use a brush to fill in any grooves.
Make sure the wall is completely dry before moving to the next step. Apply a thin coat of primer with a roller. Allow the primer to dry a full 24 hours before painting over it.
Be sure to hit corners. Wash your walls with soap and water to de-grease. Apply two thin coats of stain-blocking primer.
You can still paint over this as well. But that is not a problem. Before you start to do anything even before you start prepping and priming you need to make sure that there is no oil or grease on your wood paneling.
Be sure to get in the crevices of the panels which tend to collect dirt. When painting for wood paneling choose either a stain-blocking latex primer or an oil-based primer. Start by wiping wood paneling clean with a damp rag to remove any dust or dirt.
