How To Prepare Varnished Wood For Chalk Paint
Step by step.
How to prepare varnished wood for chalk paint. Ive experimented with this because Im a lazy arse who doesnt like sanding stuff down. For stubborn dirt and grease use warm soapy water but avoid harsh chemicals. Wipe down all the surfaces with a damp rag.
In most cases one coat of primer is enough. A quicker option was to use an emulsion paint and then protect it with a clear varnish. How to Paint Over Varnished Wood Everyone has that piece of furniture or wooden floor that they need to rework on.
So now Sherry has access to Chalk Paint. To do this go over the surface very lightly with a roller that has very little paint on it. Apply the putty filler with a scraper or a putty knife like the knife from Titan tools or Warner so that it is applied thoroughly and evenly.
Wipe away any sanding dust before painting. At the time Sherry had used a non-yellowing varnish but despite what it said on the tin it had developed a yellow tinge not the look she wanted. All you need to keep your surface dust- and pest-free is described with the following steps.
One such primer is BIN from Zinsser. A clean working surface will make it easier to remove the varnish and will assure that dirt grease and dust wont mix with the primer or paint. In the past you would use eggshell or gloss paints which would need priming and then another couple more coats.
Most pieces have solid wood under the veneer so you can just remove it and paint the wood underneath without replacing the veneer. Vacuum all the cobwebs inside underneath and on the back. Then place a damp towel over the remaining sections.
