How To Prepare Artex Ceiling For Painting

To avoid paint flaking I would recommend thinning out the fist coat with water say 15 to 20.

How to prepare artex ceiling for painting. After youve removed all the Artex check the quality of the ceiling. Once this is done paint the ceiling with a water base primer at first and then go on top with the bathroom paint. In fact when removing it you apply water to the surface to soften it prior to scraping it.

Make sure the walls and ceiling dry out completely before you start painting. Artex is a surface coating commonly used to coat ceilings in a home although it can sometimes be found on walls as well. Once the compound has dried lightly sand the surface to smooth it out.

Plaster is used in Artex products to add texture and definition. Try and re-fill the area with a good water proof filler and try to make a patten in it. My thoughts were 1 mist coat and 1.

Paint the artex surface with PVA adhesive as this will help the plaster stick and slow down the moisture absorption. In one area of our bedroom simply applying water based emulsion paint caused the Artex to start to lift from the ceiling. Whether it is necessary to wash the surface The treatment of the ceiling surface before wallpapering with wallpaper plastering or painting is a must.

Skip this step if youve got an Artex ceiling. When painting Artex it is recommended that you use emulsion paint. This means the surface is not completely flat which can make painting a bit more difficult.

Lightly rub your hand over the artex and if you get a powdery coating on your hand it will mean it hasnt been painted. Once the Artex has softened use a flat edge scraper and scrape it away. Step 1 7am.