How To Clean Fireplace Tools

An invisible coat of silicone is left behind.

How to clean fireplace tools. Different types of ash vacuum cleaners are available. They are available at hardware stores. To remove corrosion from brass tools.

These are purposed for clearing or cleaning ash from a fireplace. Dip the emery cloth in cooking oil and rub in one direction not round and round and when it is clean polish it with a Cape Cod Metal Polishing Cloth. Another cleaning method may not be the simplest but it always gives good results.

Begin by removing dust and loose soot and dirt with wet paper towels. Try a piece of lemon dipped in salt or hot vinegar and salt to remove corrosion from brass. How to Clean a Fireplace.

The first thing you have to do is make sure that the ashes have completely cooled down. Then spread a large towel where youll be. Press the igniter to light the pilot light repeat until it lights.

Strap on goggles and a respirator clean the ashes out of the firebox and remove the grate. Clean the grime and soot from fireplace tools or andirons by dipping fine-grade 000 steel wool in vegetable oil and rubbing gently. Turn the fireplace knob to Pilot and press the knob in you should hear gas flow.

Unlike the other vacuuming systems used for chimney cleaning ash vacuums are quite different. Apply a polish to bring up the shine. We would suggest you wait at least 24 hours from the last time you used your fireplace.