Woodworking Attach Table Top
In woodworking there is always more then one way to accomplish something.
Woodworking attach table top. Mark all of your mounting holes with the legs in place. Screw figure 8 fastener to base with 12 6 flat head screws. Remove legs and drill holes for threaded inserts.
Regardless of the method you choose it should meet the following criteria. Use your pocket hole screws to attach the middle of the top to your legs. Attaching a top to its base is a critical aspect of table design and construction.
The brackets that run accross the grain would have to have slotted holes to allow for expansion. Place table top on the base and screw it down from underneath with 12 6 flat head screws through the other end of the figure 8 fastener. The top must remain flat.
Rout out for them and then cover with wood on the legs just inset them on the table top. For dining tables position your legs 16-20 from the end of the table to allow for seating someone on the end. Use washers and just snug the screws so the tabletop can move under the screw heads.
Put two pieces of wood on either side of the leg forming part of the apron around it and then attach the metal legs to the apron using custom dowels similar to how its done in this video httpsyoutubeF-SxsnG7CLc just without glueing it to the top. The attachment method shouldnt compromise the design of the. Chisel out the sides of the hole to allow the table top fastener to move freely.
Install threaded inserts with a dab of glue for lubrication. Measure or eyeball where you want each leg. The image below shows a view from outside the table.
