How To Use A Wood Lathe Step By Step

Rough turn the bowl blank into an oversized rough bowl.

How to use a wood lathe step by step. Never lay tools directly on the lathe ways. Here are the basic steps of twice turning. A block of wood can help to keep the lathe ways protected.

While the lathe is turning you should never measure pieces. We then provided information about some of the important tools used for turning. Im sure you know this already.

Before you start using the lathe you need to first get familiar with the nuts and bolts of the device. Connect the wood lathe to a source of power and power it up using the power control. Use your bowl for wood finish.

Place the cutting edge of the tool on the rest keeping clear of the rotating work piece check your grip and slowly begin easing it toward the work piece. Unlike most tools in a workshop where the thing cutting the wood is the bit that moves when wood turning the wood is moving and this needs you to think about safety in a slightly different way. The 80-grit Norton 3x wheels on either side of my grinder.

Keep your hands safe from removing chips or swarf. Consider starting your project with a lower speed. If a separate table is not available use.

Take the one bolt over on a belt sander and shape it to a point. Wood turning has the potential to be dangerous. You want to move in toward it perpendicular to the work piece until the cutting edge just touches the wood.