How To Smooth Wax Carving
Someone told me to take a stocking dip into methylated spirit and gently rub it would dissolve some wax to smooth it.
How to smooth wax carving. Choosing the Right Type of Wax Model Making for Your Design. Cut the rough shape our of a block of sheet of carving wax. Note how the the back has been hollowed out.
This will soften any dirt or material that have stuck onto the stone. If the desire is to smooth the surface of the model filing and sanding the wax will work. In The Studio - The UKs Premier Private Jewellery School wwwinthestudiocouk This demonstration shows one way of creating a wax ring that can then be used.
While it worked a little but not as good as I need. Contour the wax to the desired shape. Much softer waxes like those used to wrap cheeses or what at one time was used to.
Once the metal is poured turn off the torch and the vacuum pump. I need to get at as smooth as original surface of the wire or even smoother if possible. First heat the large end of the waxing spatula place it in the wax and transfer the melted wax to the pedestal tooth.
I usually buy the blue Ferris carving wax in one pound blocks. The other thing Ive found that gives a very smooth surface on carving waxes is either Wax Kleen or Goo Gone rubbed with a clean Swiffer dust cloth. It takes some time.
Clean all the dirt and debris off the stones. Smoothing a carving wax model depends upon the design of the model. Let it sit a little bit before carving again.
