How To Prepare Untreated Wood For Painting

Wipe away any sanding dust before painting.

How to prepare untreated wood for painting. Use a long-handled scrubber brush and a mild detergent to gently scrub away accumulated dirt grime mold and other residue. Before you prime the wood must be clean and its advisable to sand it lightly to open the grain. Paintwork with only a few light blemishes can be prepared by sanding.

Of course if this sounds like too much hassle or hard work you can always call in the professionals. Then add a second coat and again rub it down. The best way to get the perfect paint job is to hire a licensed painting contractor for the project.

Dont completely remove the paint. Marks Painting offers residential and. Let the oil soak into the wood for 30-60 minutes.

Clean the wood surface thoroughly. Give the surface a full day to dry before moving on. Apply two or three coats and make sure you leave plenty of time between each painting on half dried tacky gloss will spoil the end result.

Wipe the sandpaper dust off of the wood using a damp rag. When youre satisfied with the woods appearance rinse the exterior from top to bottom with a garden hose. Lightly sand the palettes surface to remove any bumps and to open up the wood grain.

This will make it absorb the oils more efficiently. Simply so how do you paint untreated wood outside. Let the first coat dry completely then rub it down gently with fine grit sandpaper.