How To Prepare Stained And Varnished Wood For Painting

4 Prepare the cupboard surfaces for painting.

How to prepare stained and varnished wood for painting. Apply two coats using a high-quality synthetic-fiber paintbrush. Generally paint doesnt adhere to the slippery surface of varnished wood thats why sanding is required. Next wipe with a clean dry cloth.

With your stain sealing primer applied and flatted down the final job is to then apply your top coat paint. You dont have to remove the varnish completely just slightly etch the surface so that primer will stick to it. A good tip is to sand in the direction of the grain.

Apply it evenly across both sides and around all edges using a good quality brush. Painting stained and varnished furniture requires some specialized prep work but the right approach gives you lasting paint coverage and a fresh look. But the easiest way to remove that shiny top coat of lacquer or varnish is to rough it up with some sandpaper.

Sandpaper helps add texture to smooth varnished surfaces for easier painting. Ruds New Member Hi All I have managed to read through the forums and pick up some excellent advice but I just wanted to check. The TSP helps get rid of anything that would sit between the paint and wood.

Purchase My recommended Tools Brushes Paints and Primers Here. Step 1 Sand the stained or varnished furniture using 220-grit sandpaper. Painting top coat finish over primer sealer and stain blocker.

First clean the stained surface with soapy water to remove any dust dirt and cobwebs. Use a fine-grit sanding sponge to. Sand the surface Start by sanding the surface with a random-orbital sander and 150-grit paper.