How To Prepare A Painted Ceiling For Plastering

Hold the paint scraper at about a 30-degree angle from the ceiling then push it toward the loose paint.

How to prepare a painted ceiling for plastering. Set up a small step ladder that allows you to safely reach the ceiling. Step 2 Use a small damp brush to polish off the edges and corners. You might sometimes need 2 coats.

Use a paint scraper to remove all of the loose paint. PVA isshould be used in plastering to control suction and NOT to provide a key. Leave on the wall for 2.

IF YOU HAVE ANY DOUBTS ABOUT DOING THIS CALL AN ELECTRICIAN or check if the plasterer. If old plaster is completely sound apply PVA solution BQ to the walls and ceiling with a roller to sealSwitch power off at the consumer box then release light switch plates ceiling roseslight fittings and plug sockets and wrap in cling film for protection. Nicole wanted them smoothShe has placed 8 bags of 25 kg 200 kg stucco on the ceilingIn t.

Again angle the blade slightly so the edge smooths over the plaster. This will remove any dust and grease and help the new coat of paint to adhere to the wall. Sometimes your walls can hold a grease which prevents the plaster bonding so the best option is to wash your walls down with sugar soap.

Once the plaster has dried to the right condition you need to polish off your work. Its vital that all surfaces are properly prepared before painting to ensure that the finish is long lasting and looks professional. Go over the surface lightly with a clean trowel blade dampening the surface with a spray bottle as you go.

Decorating your new home. The ceilings in our living room and the kitchen were granulated. Remove old wallpaper and any loose flaky paint.