How To Prep Bare Wood For Paint

Dont attempt to strip lead paint sometimes found in old houses with a heat gun seek advice from a reputable painter and decorator.

How to prep bare wood for paint. Sandpaper or a sanding sponge to smooth out rough spots and dry spackling paste acrylic latex caulk and a caulk gun to fill gaps painters putty to fill small nail holes spackling paste or wood putty to fill large holes and gouges oil or alkyd-based undercoat primer. To get a long lasting beautiful finish from your paint or varnish and to avoid flaking and chipping you will need to prepare your bare wood properly. Sand down the edges of bare spots.

New or bare timber will need to be primed after sanding if you are to paint it. Wear a mask for sanding existing paintwork as older paints contained lead and this can be dangerous. After scraping youll notice that the remaining paint forms a ridge around the exposed wood.

The grades are measured in numbers and the lower the number the coarser the grit. How To Get A Raw Wood Look Maison De Pax. As the sealer dries the wood.

If you are deciding to paint bare wood you should seal all knots spot prime with a shellac based primer. Sanding and preparing wood before staining diy paint 101 surface prep miss mustard seed how to achieve smooth results when painting wood how to distress furniture in 6 easy steps tural digest how many coats of primer on wood 5 step pro paint. These are called grades.

Then switch to a high-grit paper 100-grit or higher and smooth the paint down to the underlying wood. If youre not staining the wood youll need to apply a wood sealer before you can actually paint. It there is paint already on the furniture then you will want to use a medium grit sandpaper to smooth down the wood and remove any paint that is chipping.

Make sure to wear a high quality dust mask whenever you sand. You can do away with these imperfections easily using a handheld power sander. Next sand down the surface of your wood.