How To Make A Lathe Parting Tool

Ensure the parting tool is perpendicular to the face of the chuck you can use a 1-2-3 block whose surfaces are ground to be parallel to one another.

How to make a lathe parting tool. Make Your Own Beading and Parting Tool from 8mm HSS tool blank. Ad Easy to Use - Laser Fits in Spindle 4-Axis 00002 resolutn Fast Setup. You dont need to buy a grinding kit or sharpening system or multiple tools to achieve your desired result.

Lathe Parting Tool Cut Off Tool. Eddies first video on making a parting tool was to start off by using a lawn edger blade and reshaping it with a grinder then he did a second video on using sawzall blades or reciprocal saw blades. The trick to this is the parting tool.

Parting can be seen as simply cutting a groove in a workpiece that is so deep that it cuts the workpiece off the bar. The idea is to turn an old used sawzall blade into to tool make a handle of wood and used some epoxy and brass rod for rivets or whatever they are called in knive handles. This cut is always at right angles to the axis of the lathe.

All you need is a lathe and an Easy Wood Tools turning tool and you can start making. On the bottom end you make a tenon with your parting tool. Ive made a couple of turning tools with carbide cutters and some with HSS cutting blanks all turned out to be very useful.

When one side of the cutter gets dull just rotate it to a new surface. You turn your blank round between centers on the lathe. I then cut the end of the blade off to square it off and I cut and ground down the teeth.

Never sharpen your tools again. How to Make a Parting Tool From A Sawzall Blade. Next I took the blade over to the disk sander and ground it down to bare metal.